ASTRO audio settings

Forum for the promotion and understanding of digital voice on the amateur bands.

Moderator:Global Moderator Team

Post Reply
User avatar
Joined:Sat Aug 25, 2007 6:04 pm
ASTRO audio settings

Post by bradlington » Sun Sep 16, 2007 5:37 pm

What is the standard setups for the audio gain settings for the astro Saber 3.

I have a slightly higher recovered audio from the FM analog-currently on 5Khz Tx setting.

Q1)I assume that the analog dev setting does not influence the Digital APCO audio ?

Q2)I assume that the two levels will be similar when changing the setting of 25 to 12,5 tx dev.

Q3) What is the norminal and does each firmware/ host/dsp play a major role in the recovered audio?

My .csv file and audio test file is listed on

Thanks in advance


User avatar
Joined:Thu Oct 19, 2006 4:20 pm
Location:Somewhere between the sun and Pluto

Post by KD8CPP » Sun Sep 16, 2007 7:38 pm

Open this guide ASTRO GUIDE BY r0f

check page 43
Achmead wrote:Oh wait I could have Clay Aiken

Post Reply