stupid radio tricks

Moderator: Global Moderator Team

User avatar
resqjony
Posts: 5
Joined: Sat Apr 28, 2007 7:11 pm
Contact:

stupid radio tricks

Postby resqjony » Sat Apr 28, 2007 8:10 pm


User avatar
Mong
9A247E-211493-9
Posts: 5455
Joined: Sun Jan 01, 2006 2:29 am
Location: Mesquite TX

Postby Mong » Sat Apr 28, 2007 8:16 pm


User avatar
resqjony
Posts: 5
Joined: Sat Apr 28, 2007 7:11 pm
Contact:

Postby resqjony » Sat Apr 28, 2007 8:42 pm

the bananas and tap shoes don't get used together do they?

:anus:

and yes...greeting and salutations all around. i've spent entirely too long leaching off the hamsexy forums, i thought it was high time i contributed something

ok...so heres the beef...
in the CS-F70/1700 software, read data from your target radio (duh), now go the the "help" menu and select "About". this opens the window that tells you all about the software (registered owner, software code ect...).
with that window open type "reserve" (loose the quotes). there is no field to type it into, just type it.
this will pop up a window advising that you have acivated the Makers Reserve function. hit enter a couple times.
you will notice a new menu in the tree view on the left side call, as you might imagine, makers reserve.
selecting that menu gives all sorts of ways to screw up your radio, but the one you care about is all the way at the bottom labeled "Set Mode Access" or something similar. enable that.
then go to the "common" screen of the "common" menu. you will find newly expanded security settings where you once more need to enable dealer set mode access and you can also set the dealer mode password.

now write the data back to the radio. to access the dealer set mode turn on the radio while holding down the button below PTT on the side as well and the P0 button. the screen will read "dealer". enter the password you set the press P0 again. using the two buttons above PTT scroll through the info for the selected channel. pushing P3 while the zone/channel number is displayed will allow you to change the change the channel by using the 2 top side buttons or by pushing P1 you can change the zone...

the rest you gotta figure out on your own 'cause i'm sick of typing...

oh...real important...DO NOT write this data to anything but the radio you read it from. the makers reserve menu relies on data specific to the individual radio to was taken from...other wise you can brick a radio.

User avatar
n3jfw
Administrator
Administrator
Posts: 5965
Joined: Fri Jun 18, 2004 1:55 am

Re: stupid radio tricks

Postby n3jfw » Sat Apr 28, 2007 9:37 pm

Last edited by n3jfw on Sun Apr 29, 2007 12:10 am, edited 1 time in total.
N3JFW 4:29 pm
(4:29:48 PM): so he's gay huh
(nameless ham) 4:30 pm
(4:30:02 PM): haha no, but he is a music major
N3JFW 4:30 pm
(4:30:15 PM): so he's still in the closet

User avatar
n3jfw
Administrator
Administrator
Posts: 5965
Joined: Fri Jun 18, 2004 1:55 am

Postby n3jfw » Sat Apr 28, 2007 9:38 pm

N3JFW 4:29 pm
(4:29:48 PM): so he's gay huh
(nameless ham) 4:30 pm
(4:30:02 PM): haha no, but he is a music major
N3JFW 4:30 pm
(4:30:15 PM): so he's still in the closet

User avatar
mancow
Moderator - Dayton 2007 Supporter
Posts: 1395
Joined: Wed Mar 02, 2005 12:58 am

Postby mancow » Sat Apr 28, 2007 10:54 pm


User avatar
resqjony
Posts: 5
Joined: Sat Apr 28, 2007 7:11 pm
Contact:

Postby resqjony » Sun Apr 29, 2007 7:29 am


User avatar
n3jfw
Administrator
Administrator
Posts: 5965
Joined: Fri Jun 18, 2004 1:55 am

Postby n3jfw » Sun Apr 29, 2007 7:46 am

N3JFW 4:29 pm
(4:29:48 PM): so he's gay huh
(nameless ham) 4:30 pm
(4:30:02 PM): haha no, but he is a music major
N3JFW 4:30 pm
(4:30:15 PM): so he's still in the closet

User avatar
resqjony
Posts: 5
Joined: Sat Apr 28, 2007 7:11 pm
Contact:

Postby resqjony » Sun Apr 29, 2007 7:56 am


User avatar
mr.syntrx
98247E-211491-4
Posts: 3968
Joined: Wed Jun 23, 2004 2:24 am
Location: HI HI FINE BUSINESS OLD MAN THERE ON THE FINE BUSINESS HIHI QSL
Contact:

Postby mr.syntrx » Sun Apr 29, 2007 10:01 am

Support the Warfighter

User avatar
resqjony
Posts: 5
Joined: Sat Apr 28, 2007 7:11 pm
Contact:

Postby resqjony » Sun Apr 29, 2007 1:55 pm

my experience so far is that most icom radios in the 400-470 split will easily go up to 480-ish and the 450-512 split tends to cover the ham band with no problem...
and the software doesn't care about which split the raido i. you can even dump a UHF file into a VHF radio and it won't say anything

the f3061 (or 4061 for uhf) has the voting scan i think...its not p25 though, its the 6.25khz fsk digital...it too appears to be FPP

User avatar
n3jfw
Administrator
Administrator
Posts: 5965
Joined: Fri Jun 18, 2004 1:55 am

Postby n3jfw » Sun Apr 29, 2007 3:50 pm

N3JFW 4:29 pm
(4:29:48 PM): so he's gay huh
(nameless ham) 4:30 pm
(4:30:02 PM): haha no, but he is a music major
N3JFW 4:30 pm
(4:30:15 PM): so he's still in the closet

User avatar
Mong
9A247E-211493-9
Posts: 5455
Joined: Sun Jan 01, 2006 2:29 am
Location: Mesquite TX

Postby Mong » Sun Apr 29, 2007 8:29 pm


User avatar
KB9SXK
98245C-001400-5
Posts: 829
Joined: Tue Dec 19, 2006 10:39 am
Location: Home
Contact:

Postby KB9SXK » Mon Apr 30, 2007 10:56 pm

"I'm with the government, I'm here to help you"

VE6HBD:
"I would have killed for a bear with a working asshole."

W2WTF:
"shut your fat arrogant yankee horses rear up and keep your opinions to yourself."


Return to “EQUIPMENT REVIEWS”

Who is online

Users browsing this forum: No registered users and 1 guest