HELP

Discussion of internet radio linking, and other similar things.

Moderator: Global Moderator Team

User avatar
wb4bsd
Moderator
Posts: 423
Joined: Thu Jul 22, 2004 8:58 pm
Location: Cleveland, TN
Contact:

HELP

Postby wb4bsd » Thu Nov 24, 2005 11:32 pm

Rusty
WB4BSD
IRLP Node 4739 Owner
Coded General Class Hammy

User avatar
ae6ip
98247E-011400-8
Posts: 935
Joined: Sat Jun 26, 2004 7:42 pm

Postby ae6ip » Fri Nov 25, 2005 1:35 am

you might start by mentioning which distro you're using.

User avatar
wb4bsd
Moderator
Posts: 423
Joined: Thu Jul 22, 2004 8:58 pm
Location: Cleveland, TN
Contact:

Postby wb4bsd » Fri Nov 25, 2005 8:48 am

Rusty

WB4BSD

IRLP Node 4739 Owner

Coded General Class Hammy

User avatar
K5MLK
14249C-001400-8
Posts: 549
Joined: Sat Nov 13, 2004 2:47 pm
Location: Lufkin, TX
Contact:

Postby K5MLK » Fri Nov 25, 2005 12:07 pm

Have you tried to update files yet?... That's the first step.
-Matt, K5MLK

User avatar
ve3nsv
98249C-001400-7
Posts: 695
Joined: Thu Jul 08, 2004 8:50 pm
Location: Kitchener
Contact:

Postby ve3nsv » Fri Nov 25, 2005 10:24 pm

Have you tried reading the install doc Rusty, you need to reinstall your soundcard.



2.3 Using the alsaconf program ? FEDORA ONLY
Installing your soundcard drivers when using Fedora is performed by using the alsaconf program. To test your soundcard, plug a speaker or headphones into the speaker output of your soundcard before you begin the tests

Step:

1. Log on as user root

2. Type /usr/sbin/alsaconf



The process is very automated. After pressing OK at the welcome screen, the computer will test for most common ISA cards and all PCI based cards. This process can take several minutes. Once the script has finished the detection process, you will get a choice of detected sound cards, or a selection to probe for ISA based legacy cards.



If the sound card is shown in the list, highlight it and select OK. Skip the next paragraph about ISA cards.



If the sound card is ISA and not shown in the list, select legacy and press enter. It will warn about instability, choose YES to continue. Unselect any cards that you a SURE that you do not have installed, and choose OK. It will ask if you want to try all IRQ/DMA combinations, and you should select YES. Your card should be found and installed. If not, you can play around with the settings, or try a PCI sound card. If detected, continue.



You will be prompted to add entries to the /etc/modprobe.conf file. Select YES. The system will then inform you that the mixer will be adjusted, and a sample wave file will play.



That?s it! Your sound card should now work for IRLP.
IRLP Node 2410
Echolink Node 152298



They call it PMS because Mad Cow Disease was already taken.

User avatar
wb4bsd
Moderator
Posts: 423
Joined: Thu Jul 22, 2004 8:58 pm
Location: Cleveland, TN
Contact:

Postby wb4bsd » Sat Nov 26, 2005 1:07 am

Rusty

WB4BSD

IRLP Node 4739 Owner

Coded General Class Hammy

User avatar
ve3nsv
98249C-001400-7
Posts: 695
Joined: Thu Jul 08, 2004 8:50 pm
Location: Kitchener
Contact:

Postby ve3nsv » Sat Nov 26, 2005 9:28 am

IRLP Node 2410

Echolink Node 152298







They call it PMS because Mad Cow Disease was already taken.


Return to “VoIP/IRLP/EchoLink etc”

Who is online

Users browsing this forum: No registered users and 1 guest