P25 repeaters
Moderator: Global Moderator Team
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
P25 repeaters
What do you guys do, just scour eBay and 'the labs for quantars(?) ?
I wouldn't mind playing with making a repeater out of a couple of mobile radios (the method over on batlabs) but ideally i'd want something made for the job.
How much would I be looking to shell out for a secondhand P25 repeater?
I wouldn't mind playing with making a repeater out of a couple of mobile radios (the method over on batlabs) but ideally i'd want something made for the job.
How much would I be looking to shell out for a secondhand P25 repeater?
KC9UZB - ex M3ECM - expat dirty socialist Brit
Re: P25 repeaters
I'm still looking at the idea of two astros for a repeater. I'm becoming more and more convinced that it can't really be done, (correctly anyway) and be true mixed mode.
True, there is the discriminator to modulator method (maxtrac style) but I wanted to see if there was a way to link the two after the data had been processed. Basically, I was thinking of just routing around the two DSPs somehow. It looks like the transmit mode is somewhat more complicated than receive. There appears to be three major components. There is the ABACUS chip on the RF board that digitizes the RF. It sends the I / Q data to the ADSIC chip over a couple of lines in AC by way of varying current instead of TTL. The manual says it eliminates the generation of stray RF fields created by high speed digital switching logic gates and lines. The ADSIC does some processing and filtering then sends the data on to the DSP. It then decodes the data through its IMBE codecs and sends it back over to the ADSIC which has a D/A converter. The ADSIC then renders a regular analog signal that is sent to the speaker amps.
In transmit mode the mic audio is directly processed by the ADSIC. It sends the data over numerous parallel lines to the DSP. The DSP then creates the IMBE data format and it is sent back over to the ADSIC where it is processed by a D/A converter and sent on to the RF modulator.
What confuses me is use of four major lines in between the chips. There is an RXD to SRD serial line that goes from the ADSIC to the DSP in RX mode. They say that data moves at 2.4 Mhz on it. In transmit mode the data moves from the DSPto the ADSIC from the STD to TXD line at 1.2 mhz. I was hoping that a unit could be set to transmit and one to receive with the lines basically severed and strapped from the reciever's RXD to the transmitters TXD but that's obviously not going to happen. Plus, who's to say what format its in.
So, the next place to look is the secure module. The problem I'm seeing there is that I'm not sure that the data in TX mode is in the same format and data rate in RX mode and vice versa, same problem as before. But, it's a bit more promising since it's a dedicated line meant just for raw data manipulation (encryption).
I would think that the fist step would be to strap the two together in a fashion that they both use the same master data clocks so there are no sync issues. But I'm not sure if that's possible since each radio may need to vary the oscillators a bit for fine tuning. I need to see if everything is derived from the 16.xxx Mhz clock or not. I can't remember right now.
Then, I would assume that the secure module data is not present on the lines unless the radio is set to secure capable via RSS/CPS. That would mean that valid modules would have to be installed and loaded with non volatile keys since their incoming/outgoing lines would have to be severed. Once that is done the lncoming data line from the RX radio would need to be sent over to the TX radio's line, effectively cutting the secure modules out of the system without them knowing it. But, is that possible? Does the radio check those lines at power up to verify that the module is working? If so, something like a high speed switch would have to be put in line to disconnect the modules after power up.
.........ahhhh what a nightmare
Maybe there is something simpler that I am not seeing?
This a cut and past of how the DSP and ADSIC talk to each other in RX and TX mode.
![Image](http://i121.photobucket.com/albums/o222/mancow_photos/DSPADSIC.jpg)
True, there is the discriminator to modulator method (maxtrac style) but I wanted to see if there was a way to link the two after the data had been processed. Basically, I was thinking of just routing around the two DSPs somehow. It looks like the transmit mode is somewhat more complicated than receive. There appears to be three major components. There is the ABACUS chip on the RF board that digitizes the RF. It sends the I / Q data to the ADSIC chip over a couple of lines in AC by way of varying current instead of TTL. The manual says it eliminates the generation of stray RF fields created by high speed digital switching logic gates and lines. The ADSIC does some processing and filtering then sends the data on to the DSP. It then decodes the data through its IMBE codecs and sends it back over to the ADSIC which has a D/A converter. The ADSIC then renders a regular analog signal that is sent to the speaker amps.
In transmit mode the mic audio is directly processed by the ADSIC. It sends the data over numerous parallel lines to the DSP. The DSP then creates the IMBE data format and it is sent back over to the ADSIC where it is processed by a D/A converter and sent on to the RF modulator.
What confuses me is use of four major lines in between the chips. There is an RXD to SRD serial line that goes from the ADSIC to the DSP in RX mode. They say that data moves at 2.4 Mhz on it. In transmit mode the data moves from the DSPto the ADSIC from the STD to TXD line at 1.2 mhz. I was hoping that a unit could be set to transmit and one to receive with the lines basically severed and strapped from the reciever's RXD to the transmitters TXD but that's obviously not going to happen. Plus, who's to say what format its in.
So, the next place to look is the secure module. The problem I'm seeing there is that I'm not sure that the data in TX mode is in the same format and data rate in RX mode and vice versa, same problem as before. But, it's a bit more promising since it's a dedicated line meant just for raw data manipulation (encryption).
I would think that the fist step would be to strap the two together in a fashion that they both use the same master data clocks so there are no sync issues. But I'm not sure if that's possible since each radio may need to vary the oscillators a bit for fine tuning. I need to see if everything is derived from the 16.xxx Mhz clock or not. I can't remember right now.
Then, I would assume that the secure module data is not present on the lines unless the radio is set to secure capable via RSS/CPS. That would mean that valid modules would have to be installed and loaded with non volatile keys since their incoming/outgoing lines would have to be severed. Once that is done the lncoming data line from the RX radio would need to be sent over to the TX radio's line, effectively cutting the secure modules out of the system without them knowing it. But, is that possible? Does the radio check those lines at power up to verify that the module is working? If so, something like a high speed switch would have to be put in line to disconnect the modules after power up.
.........ahhhh what a nightmare
Maybe there is something simpler that I am not seeing?
This a cut and past of how the DSP and ADSIC talk to each other in RX and TX mode.
![Image](http://i121.photobucket.com/albums/o222/mancow_photos/DSPADSIC.jpg)
-
- Administrator
- Posts: 3493
- Joined: Thu Jan 26, 2006 11:01 pm
- Location: Fine Business and HI HI
- Contact:
Re: P25 repeaters
I don't know where your looking but typical range for a Quantar has been $1200 - $2500 for the last several sold on EBay depending on UHF or VHF.RayRay wrote:$2600 to $4000 is what a used Quantar typically goes for, sometimes more. I'm not sure what it would be over on your side of the pond, save shipping from here.
There are other used radio sites that may be higher and may be the same. The last batch of VHF quantars actually started on M3ECM's side of the pond and came out of London that were sold over on Batlabs and went for about $1800 per unit ready to go with your frequency already programmed.
There are a whole list of other repeaters as well, such as Motorola Quantro, GE Mastr III, Tait, and others.
To answer M3ECM's question, probably Ebay to start and go from there. Talkfar.com is a used radio equipment site (not sure if there is something simular on your side of the pond).
I will always place the mission first.
I will never accept defeat.
I will never quit.
I will never leave a fallen commrade
I will never accept defeat.
I will never quit.
I will never leave a fallen commrade
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
Thanks Dan.
Surprising they came from London, but if they were used I actually have a good idea who they originated from (Her Majesty's Government).
I don't mind paying shipping from the US, although it would be pretty hefty I imagine. But maybe I'll get lucky and find a UK source.
David.
Surprising they came from London, but if they were used I actually have a good idea who they originated from (Her Majesty's Government).
I don't mind paying shipping from the US, although it would be pretty hefty I imagine. But maybe I'll get lucky and find a UK source.
David.
KC9UZB - ex M3ECM - expat dirty socialist Brit
Re: P25 repeaters
I'm rather surprised somebody hasn't done the simpler idea of just using a low-cost low-power DSP to:
1) take the flat RX audio (discriminator audio) and recover the CAI symbol stream.
2) take that symbol stream and regenerate the idealized waveform out to the flat TX input.
The DSP wouldn't have to have any protocol, and most certainly wouldn't need the vocoder - just the C4FM data slicer/C4FM modulator.
That would clean up any modulation fidelity error in the recovered signal, which would be "enough" in most cases.
(adding the code to de-frame the data and apply the foward error correction would be a bit more work, but you *sitll* wouldn't need the vocoder itself).
Let's see: assume you digitized the audio at 19.2kSample/sec, did a simple slice-and-compute-fidelity to recover symbol timing, and a simple modulator with a 4 tap integrate and dump as called out in the specs: call it about 50 operations per incoming sample and 5 operations per sample on the outbound data, about half a million instructions per second. Just about any reasonable modern microcontroller should be able to do this (PICs need not apply, but just about all of the modern Atmel devices would probably do).
(gosh this is easier when you don't have to compute the parametrics to 4 places!)
1) take the flat RX audio (discriminator audio) and recover the CAI symbol stream.
2) take that symbol stream and regenerate the idealized waveform out to the flat TX input.
The DSP wouldn't have to have any protocol, and most certainly wouldn't need the vocoder - just the C4FM data slicer/C4FM modulator.
That would clean up any modulation fidelity error in the recovered signal, which would be "enough" in most cases.
(adding the code to de-frame the data and apply the foward error correction would be a bit more work, but you *sitll* wouldn't need the vocoder itself).
Let's see: assume you digitized the audio at 19.2kSample/sec, did a simple slice-and-compute-fidelity to recover symbol timing, and a simple modulator with a 4 tap integrate and dump as called out in the specs: call it about 50 operations per incoming sample and 5 operations per sample on the outbound data, about half a million instructions per second. Just about any reasonable modern microcontroller should be able to do this (PICs need not apply, but just about all of the modern Atmel devices would probably do).
(gosh this is easier when you don't have to compute the parametrics to 4 places!)
These opinions are mine, not Aeroflex's - if you want service info, manual, or other official support please contact Aeroflex directly.
Re: P25 repeaters
Get er done!
That's kind of what I was trying to do with the hardware here.
Where would a person get the specs for the protocol, enough to do something like that?
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
That's kind of what I was trying to do with the hardware here.
Where would a person get the specs for the protocol, enough to do something like that?
- escomm
- professor of rectalingus
- Posts: 4409
- Joined: Thu Mar 30, 2006 1:54 am
- Location: Chief of the CAREPOLICE
Re: P25 repeaters
19.2k sample rate eh
No wonder digital sounds like asshole.
No wonder digital sounds like asshole.
I'd hit it so hard you'd have to be to King of England to pull me out
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
Yeah but it stops the hammies and the idiots from hearing what's being said... xD
KC9UZB - ex M3ECM - expat dirty socialist Brit
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
Bugger that.
I'm an anti social fuck and proud of it
None of the hams round here even know what PL is, nevermind P25.
(Wowbagger enters from stage left to tell us the difference between IMBE and P25).
I'm an anti social fuck and proud of it
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
None of the hams round here even know what PL is, nevermind P25.
(Wowbagger enters from stage left to tell us the difference between IMBE and P25).
KC9UZB - ex M3ECM - expat dirty socialist Brit
- rdunajewski
- MOT1
- Posts: 11
- Joined: Sat Jun 23, 2007 7:53 pm
- Location: Edison, NJ
- Contact:
Re: P25 repeaters
I agree, encryption has no place on Ham. I enjoy new technology, especially digital voice, so I'm not against P25. If you're looking for privacy, try a cell phone or use encryption on the proper radio service. Digital alone is enough to keep your conversations semi-private due to lack of hardware among the majority of Hams. There are other digital formats that can't be decoded on a scanner. Honestly, what would you be saying on Ham that's so secret?RayRay wrote:But the point of running IMBE on ham should not be to stop other hams from what is being said at all. It should be for the advancement of the hobby, and to get other hams involved in that mode. Que?
If everyone ran encryption on Ham, how would we know who's licensed and who's just a pirate? If you're giving out your key, then what's the point of using encryption in the first place? Green light on top of the radio? Come on..
Rich
myGMRS.com
Ham: N2DLX
GMRS: WQEJ577
myGMRS.com
Ham: N2DLX
GMRS: WQEJ577
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
Um.
who mentioned crypto?
My radio gives me a green light anyway :)
Y'all maybe don;t understand, but people are envious of the UK of intelligence. so when, on rare occasions, myself and my friends want to have an intellectual discussion, we get people butting in and being general twats.
We switched to digital to put off 99% of the people out there... not many people have p25 radios in the UK.
Anyway - with respect Ray... you took my thread off topic. Bugger off.
who mentioned crypto?
My radio gives me a green light anyway :)
Y'all maybe don;t understand, but people are envious of the UK of intelligence. so when, on rare occasions, myself and my friends want to have an intellectual discussion, we get people butting in and being general twats.
We switched to digital to put off 99% of the people out there... not many people have p25 radios in the UK.
Anyway - with respect Ray... you took my thread off topic. Bugger off.
KC9UZB - ex M3ECM - expat dirty socialist Brit
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
eh.
too many typos and spelling errors in that post to care, except i meant 'in the uk of intelligence'. which kinda proves my point that i dont have any.
ho hum.
To sum up. I'm not breaking any rules by running P25 - I'm not running crypto, so basically it might not be in the spirit of ham radio, but neither is them being dickwads.
too many typos and spelling errors in that post to care, except i meant 'in the uk of intelligence'. which kinda proves my point that i dont have any.
ho hum.
To sum up. I'm not breaking any rules by running P25 - I'm not running crypto, so basically it might not be in the spirit of ham radio, but neither is them being dickwads.
KC9UZB - ex M3ECM - expat dirty socialist Brit
- motorola_otaku
- Cock Block
- Posts: 6671
- Joined: Mon Nov 29, 2004 8:53 pm
- Location: Stinkadena, TX
Re: P25 repeaters
I've been looking at the Daniels RX/TX modules, but not seriously enough to warrant making a few phone calls to determine pricing. Ditto on the new Raytheon P25 repeater controller, which from what I understand does basically what Wowbagger just described but with some extra bells-and-whistles (programmable RX/TX NAC, multiple receiver/transmitter control, maybe linking?)
And the sign says you got to have a membership card to get inside.
- motorola_otaku
- Cock Block
- Posts: 6671
- Joined: Mon Nov 29, 2004 8:53 pm
- Location: Stinkadena, TX
Re: P25 repeaters
fake edit: Midland makes a P25 repeater too; just saw the ad for that one yesterday. You'd think it'd be cheap, being Midland and all, but probably not. ![THE BABY! :baby:](./images/smilies/smileybaby.gif)
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
And the sign says you got to have a membership card to get inside.
Re: P25 repeaters
RayRay wrote:But the point of running IMBE on ham should not be to stop other hams from what is being said at all. It should be for the advancement of the hobby, and to get other hams involved in that mode. Que?
Ok, how does buying a radio on egay and programming it advancing the hobby?
I'll take a warm midget fart over a cold beer any day
- smokeybehr
- 98247E-211491-4
- Posts: 3241
- Joined: Thu Apr 19, 2007 12:58 am
- Location: In the muthaf***in' forest, bitch! Where else?
- Contact:
Re: P25 repeaters
Don't bother with the Daniels gear unless you have some serious coin. ISTR that a Daniels repeater runs about the same as a full Quantar setup, and you still need to buy all of the outboard RF parts and a 12V PSU/batteries.motorola_otaku wrote:I've been looking at the Daniels RX/TX modules, but not seriously enough to warrant making a few phone calls to determine pricing. Ditto on the new Raytheon P25 repeater controller, which from what I understand does basically what Wowbagger just described but with some extra bells-and-whistles (programmable RX/TX NAC, multiple receiver/transmitter control, maybe linking?)
mong wrote: If you are a chick, show us your tits
If you're a dude, show rayray your tits
Re: P25 repeaters
I would have thought the limiting factor in all of this is the licencing fees a manufacturer has to pay to use the IMBE technology.motorola_otaku wrote:fake edit: Midland makes a P25 repeater too; just saw the ad for that one yesterday. You'd think it'd be cheap, being Midland and all, but probably not.
Once that patent expires (or gets challenged and invalidated) prices will be high regardless.
Re: P25 repeaters
RayRay wrote:By putting up a repeater (Quantar) and inviting other people to try a different mode.Mong wrote:RayRay wrote:But the point of running IMBE on ham should not be to stop other hams from what is being said at all. It should be for the advancement of the hobby, and to get other hams involved in that mode. Que?
Ok, how does buying a radio on egay and programming it advancing the hobby?
So putting up a P25 repeater is cool because it advances the hobby, but putting up a D-star repeater is gay because, uh, why? Is it because it's actually meant for hams to use and has ham-related software to go with it?
I really don't give a hoot what you guys burn your money on, but the double standard that some have is silly.
It could be worse, you could be wasting your time on HF (waiting for the incoming Toilet Duck container)
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
I'll take a warm midget fart over a cold beer any day
-
- Dayton 2005/2006/2007 Supporter
- Posts: 417
- Joined: Sun Feb 27, 2005 4:33 pm
Re: P25 repeaters
Advancing the hobby since it's taking equipment that was used for something else, competently modifying it, and making it reliability work in Amateur Service. The D-Star route is uncrating something and putting it into service, AKA appliance operatorMong wrote:So putting up a P25 repeater is cool because it advances the hobby, but putting up a D-star repeater is gay because, uh, why? Is it because it's actually meant for hams to use and has ham-related software to go with it?
As a side note, the P25 machines (Quantars) that I have seen were installed far better then the commercial & public safety equipment that is co-resident on the site.
Re: P25 repeaters
Either from the TIA, or I think there's enough information on the Internet that, if you have enough background in signal processing to do this you could piece it together.mancow wrote:Get er done!![]()
That's kind of what I was trying to do with the hardware here.
Where would a person get the specs for the protocol, enough to do something like that?
These opinions are mine, not Aeroflex's - if you want service info, manual, or other official support please contact Aeroflex directly.
- motorola_otaku
- Cock Block
- Posts: 6671
- Joined: Mon Nov 29, 2004 8:53 pm
- Location: Stinkadena, TX
Re: P25 repeaters
Yeah, I kinda figured that would be the case. Fuckin' shit gets priced right out of the stratosphere when its only major consumer is government/public safety.smokeybehr wrote:Don't bother with the Daniels gear unless you have some serious coin. ISTR that a Daniels repeater runs about the same as a full Quantar setup, and you still need to buy all of the outboard RF parts and a 12V PSU/batteries.
![:ve4uo:](./images/smilies/grin.gif)
For me, the big attraction to commercial gear was never about e-peen enhancement or playing cop or any of that shit; it's about having a radio that works when I want it to work, all of the time, without fail. I cut my teeth on basically every scanner Radio Shack and Uniden made for several years before I started buying Maxtracs and Spectras, and the selling point is the same now as it was then: brick shithouse receiver selectivity and superb audio fidelity. Ham shit and consumer-grade receivers still aren't there in just those two very basic terms, and that alone is enough to keep me away. And, by extension, that limits me to P25 for a digital voice mode to play with. Also, most made-for-ham radios are really over-designed for basic FM repeater use. Having a VFO and selectable filter bandwidths is great for SSB or AM where variable propagation is your enemy, but on the FM repeater end you "know the rules", so to speak, and all you really need is channel scan and instant PL/DPL decode. And, of course, a receiver that doesn't get eaten alive with intermod every time you get within 2 miles of a high-power commercial transmitter. Seriously, how the fuck do you guys put up with that?Mong wrote:So putting up a P25 repeater is cool because it advances the hobby, but putting up a D-star repeater is gay because, uh, why? Is it because it's actually meant for hams to use and has ham-related software to go with it?
![:ve4uo:](./images/smilies/grin.gif)
As for "advancing the art", we lost that battle to the commercial sector decades ago. One thing we could do as a group to really put ourselves ahead of the pack is adopt SDR early-on and start developing applications for it. Since everything is done in software, it just need someone to write the code (or pay for it, as required) to get a radio that does analog and multiple digital voice formats across multiple bands with appropriately tight front-end settings.
And the sign says you got to have a membership card to get inside.
- escomm
- professor of rectalingus
- Posts: 4409
- Joined: Thu Mar 30, 2006 1:54 am
- Location: Chief of the CAREPOLICE
Re: P25 repeaters
Uh, SDR still requires a great deal of hardware engineering. You don't just program the radio to tx from 30MHz to 900Mhz and off you go. While you probably know that, your post seems to imply it's just writing some code. Couldn't be further from the truth.
I'd hit it so hard you'd have to be to King of England to pull me out
- smokeybehr
- 98247E-211491-4
- Posts: 3241
- Joined: Thu Apr 19, 2007 12:58 am
- Location: In the muthaf***in' forest, bitch! Where else?
- Contact:
Re: P25 repeaters
Yeah, but it's some **REALLY** cool shit. We've got an 800MHz Daniels repeater on the OASIS trailer, and all of the NIFC repeaters-in-a-box are Daniels. The Aviation links are the coolest, though. There's 2 fully agile AM transcievers, and a dual mode analog/digital UHF-Lo repeater. They're powered by either 4x 7.5V primary cells, or a 100 Ah Gel Cell battery, backed up with an optional solar panel set. All of the P25 repeaters are dual mode at the flip of a switch. I'll try and get pictures next time I can get to an incident and get the COMT to crack the case open.motorola_otaku wrote:Yeah, I kinda figured that would be the case. Fuckin' shit gets priced right out of the stratosphere when its only major consumer is government/public safety.smokeybehr wrote:Don't bother with the Daniels gear unless you have some serious coin. ISTR that a Daniels repeater runs about the same as a full Quantar setup, and you still need to buy all of the outboard RF parts and a 12V PSU/batteries.Oh well, maybe the Midland box will be a little more reasonably-priced without being a total turd.
mong wrote: If you are a chick, show us your tits
If you're a dude, show rayray your tits
- akardam
- King of the Geeks
- Posts: 866
- Joined: Sat Nov 05, 2005 5:45 pm
- Location: People's Republik of Khalifournia
Re: P25 repeaters
Daniels has made their name by being the ultra low power consumption (by comparison) repeaters - if memory serves, in standby mode the repeater draws something on the order of 200 mA! This is one reason why you see them setup as so many port-a-peaters. We use a UHF one out on the playa as temporary fill in coverage (though once we go simulcast/voted we won't need it anymore, but I digress...).smokeybehr wrote:Yeah, but it's some **REALLY** cool shit. We've got an 800MHz Daniels repeater on the OASIS trailer, and all of the NIFC repeaters-in-a-box are Daniels. The Aviation links are the coolest, though. There's 2 fully agile AM transcievers, and a dual mode analog/digital UHF-Lo repeater. They're powered by either 4x 7.5V primary cells, or a 100 Ah Gel Cell battery, backed up with an optional solar panel set. All of the P25 repeaters are dual mode at the flip of a switch. I'll try and get pictures next time I can get to an incident and get the COMT to crack the case open.
I priced out a basic Daniels UHF P25 repeater a while back, for myself. With the bare minimum configuration (TX, RX, amp, controller, backplane/frame) the "amateur radio" price was $8700! Too rich for my blood.
By the way, when I was dealing with Daniels on the quote, I came to learn quite a few of their higher ups are hams. Even though I didn't end up buying from them, I had several quite pleasant conversations. They definitely put together a bulletproof, well thought out product.
KG6SLY | Broadcasting Around the Galaxy Around the Clock
Oh come on. This isn't shooting fish in a barrel, this is dropping a tactical nuke on a bucket full of carp.
Oh come on. This isn't shooting fish in a barrel, this is dropping a tactical nuke on a bucket full of carp.
Re: P25 repeaters
My welfare P25 repeater is slowly taking shape.
So far it sounds great but it's still on the bench with no duplexer and exiter power. I modded (sorry Ken if you're reading this) a friend's Communications Specialists community repeater controller to pass good clean flat audio. A reed relay acts along with the COR line to kick the internally generated CW ID and courtesy to the audio line while disabling the open hash of the raw disc. audio when in hang time. The result so far is excellent audio in analog and digital with a nice smooth silent hang time and clean ID tones. The nice thing is that it has DTMF control so all functions can be changed remotely such as PL or DPL control or open mixed mode operation.
I'm curious if it's really going to be worth all the effort once I finally get a chance to put some distance to it.
![ARES WACKER! :vestman:](./images/smilies/vestman.gif)
![wacker :wacker:](./images/smilies/whacker.gif)
So far it sounds great but it's still on the bench with no duplexer and exiter power. I modded (sorry Ken if you're reading this) a friend's Communications Specialists community repeater controller to pass good clean flat audio. A reed relay acts along with the COR line to kick the internally generated CW ID and courtesy to the audio line while disabling the open hash of the raw disc. audio when in hang time. The result so far is excellent audio in analog and digital with a nice smooth silent hang time and clean ID tones. The nice thing is that it has DTMF control so all functions can be changed remotely such as PL or DPL control or open mixed mode operation.
I'm curious if it's really going to be worth all the effort once I finally get a chance to put some distance to it.
- KB7PST
- 2135
- Posts: 74
- Joined: Tue Mar 04, 2008 10:19 pm
- Location: Left Wing Squirrely Wrath
- Contact:
Re: P25 repeaters
Yes, but not everything is about TX. SDR receivers are here now, have software, and are fairly inexpensive. I own an SDR-IQ, it retails for $500, covers 50hz (that's *hertz*) to 30Mhz, can visually decode and record a 190khz swath of bandwidth, and can tune any signal in that swath either real-time or from a save file (and yes, 192khz .wav files are feckin huge...). It is great for contesting (I don't have the computing horsepower, but pair an SDR with CW Skimmer and you can decode the entire CW segment of any HF band in real time...)escomm wrote:Uh, SDR still requires a great deal of hardware engineering. You don't just program the radio to tx from 30MHz to 900Mhz and off you go. While you probably know that, your post seems to imply it's just writing some code. Couldn't be further from the truth.
P25 and SDR are about moving forward. Supposedly HAM radio was on the crest of new technologies, and early adopters. Isn't there something in that "Amateur's Code" about being progressive?
Not to mention that both take the pants off of Icom. They can keep the 7800, I can do things with my teeny little box that their over-expensive box with the knobs on it can't even think about. D-Star would be okay, but just like Airmail, it is reinventing the wheel. We have digital systems that work, P25 and AX25/TCPIP have been around and proven technologies. P25 and Airmail make no advancements on those technologies, other than they are "shinier".
Sorry for the rant. Food for thought. Thought, from food.
Re: P25 repeaters
Hmmmm.... well I tried the welfare maxtrac to maxtrac flat audio setup over at batlabs. No joy. I figured that a matched maxtrac would perform even better than this old King mobile but no. I tried every devation adjustment step between 13-35 with no sucess. As usual the PSR500 decodes most anything but the XTSs just sit and puke out raw CAI noise.
Re: P25 repeaters
These chips from CML micros could be the basis for a simple P25 machine. Couple with with an atmel ATMega16 to run the show and bobs your uncle
goto http://www.cmlmicro.com/products/index. ... index=true and click on the C4FM Modem function.
ATmega16 can do SPI which is the bus used to control the CML chip. then all you need is the RF gear and yer done.
Cheers,
Matt
goto http://www.cmlmicro.com/products/index. ... index=true and click on the C4FM Modem function.
ATmega16 can do SPI which is the bus used to control the CML chip. then all you need is the RF gear and yer done.
Cheers,
Matt
- KC9UZB
- 98247E-011480-1
- Posts: 1289
- Joined: Sat Jun 24, 2006 11:10 am
- Location: Artist formerly known as M3ECM (Indiana)
Re: P25 repeaters
I'll commission you to build me a P25 repeater then Matt ;)
Actually I probably couldn't afford it![THE BABY! :baby:](./images/smilies/smileybaby.gif)
Actually I probably couldn't afford it
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
KC9UZB - ex M3ECM - expat dirty socialist Brit
Re: P25 repeaters
Hardest thing I came across was the sale poons at CML. Al I wanted was some samples of the chips and the data sheets/SPI instruction sets.
Do you thnk they would sell them to me? No way.. They wanted to see my support structure, intended customer base, production volumes, blah blah... when I tried explaining that it was simply to build a prototype, they went back and asked the same questions again...
Its a pity because it sounds like they have a good product that could make this a very easy project.
Cheers,
Matt
Do you thnk they would sell them to me? No way.. They wanted to see my support structure, intended customer base, production volumes, blah blah... when I tried explaining that it was simply to build a prototype, they went back and asked the same questions again...
Its a pity because it sounds like they have a good product that could make this a very easy project.
Cheers,
Matt
Re: P25 repeaters
I was looking at the exact same thing. I almost contacted them but I figured I would get that same response. It's too bad everyone has to act it's 1944 and they hold the plans to the Manhattan Project.
BTW, not that anyone cares but I did get the maxtracs to pass nice clean fairly unmolested P-25 data. It's still running on exciter power here (less duplexer) for test purposes but the XTS5K 2K and every other radio here are decoding just fine. I got the tone panel modded to operate with CW ID and DTMF operation too so everything works normally less PL of course.
The real world test should be coming soon.
BTW, not that anyone cares but I did get the maxtracs to pass nice clean fairly unmolested P-25 data. It's still running on exciter power here (less duplexer) for test purposes but the XTS5K 2K and every other radio here are decoding just fine. I got the tone panel modded to operate with CW ID and DTMF operation too so everything works normally less PL of course.
The real world test should be coming soon.
- mr.syntrx
- 98247E-211491-4
- Posts: 3970
- Joined: Wed Jun 23, 2004 2:24 am
- Location: HI HI FINE BUSINESS OLD MAN THERE ON THE FINE BUSINESS HIHI QSL
- Contact:
Re: P25 repeaters
Actually, with JTRS (Joint Tactical Radio System)/SCA (Software Communications Architecture), you don't need to know much at all about the underlying hardware to develop a software waveform.escomm wrote:Uh, SDR still requires a great deal of hardware engineering. You don't just program the radio to tx from 30MHz to 900Mhz and off you go. While you probably know that, your post seems to imply it's just writing some code. Couldn't be further from the truth.
Support the Warfighter
- motorola_otaku
- Cock Block
- Posts: 6671
- Joined: Mon Nov 29, 2004 8:53 pm
- Location: Stinkadena, TX
Re: P25 repeaters
Back on this a little bit.. I'm reading the C4FM modem specs and it lists 4.8 and 9.6 kbps as available sampling rates. Since P25 uses 19.2, wouldn't that render it useless even if we could get one?MattSR wrote:These chips from CML micros could be the basis for a simple P25 machine. Couple with with an atmel ATMega16 to run the show and bobs your uncle
goto http://www.cmlmicro.com/products/index. ... index=true and click on the C4FM Modem function.
ATmega16 can do SPI which is the bus used to control the CML chip. then all you need is the RF gear and yer done.
Cheers,
Matt
Also, it references C-BUS as the communication protocol to the microcontroller, not SPI.
Did I mention that I don't know the first thing about most of this?
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
And the sign says you got to have a membership card to get inside.
Re: P25 repeaters
P25 uses bitrate of 9.6kbps (4800 bits per second signalling rate @ 2 bits per symbol)
The chips (when loaded with the correct image) have been specifically designed for a P25 application. They even automatically detect and insert the P25 frame sync for you.
Have a look at CML micros documentation on C-BUS, its directly compatible with SPI.
The chips (when loaded with the correct image) have been specifically designed for a P25 application. They even automatically detect and insert the P25 frame sync for you.
Have a look at CML micros documentation on C-BUS, its directly compatible with SPI.
- mr.syntrx
- 98247E-211491-4
- Posts: 3970
- Joined: Wed Jun 23, 2004 2:24 am
- Location: HI HI FINE BUSINESS OLD MAN THERE ON THE FINE BUSINESS HIHI QSL
- Contact:
Re: P25 repeaters
Even the engineers working down the hall from me have a fuckload of trouble getting CML samples.
Buy a USRP with the appropriate transmitter and reciever modules, and... http://www.sedition.org.au/op25/
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
Buy a USRP with the appropriate transmitter and reciever modules, and... http://www.sedition.org.au/op25/
![THE BABY! :baby:](./images/smilies/smileybaby.gif)
Support the Warfighter