What is the standard setups for the audio gain settings for the astro Saber 3.
I have a slightly higher recovered audio from the FM analog-currently on 5Khz Tx setting.
Q1)I assume that the analog dev setting does not influence the Digital APCO audio ?
Q2)I assume that the two levels will be similar when changing the setting of 25 to 12,5 tx dev.
Q3) What is the norminal and does each firmware/ host/dsp play a major role in the recovered audio?
My .csv file and audio test file is listed on http://groups.yahoo.com/group/ASTROdigital_X/
Thanks in advance
Brad
ASTRO audio settings
Moderator: Global Moderator Team
- bradlington
- Posts: 9
- Joined: Sat Aug 25, 2007 6:04 pm
- Contact: