HAMSEXY DOT COM

I am looking at the radio I own, and it also shows this Flash Code captioned above, and in fact, these features are working in my radio. Some work in Analog Only mode, and other features work in Digital Only. I don't know why you state someone is a liar, when apparently you don't have knowledge tha...

I'll be there for the BBQ....

Pretty decent tailgating as well.

escomm wrote:I object on National Security grounds

You can object on National security grounds all you want, but I want to see you get over the fence to get on the grounds.....

BTW, flashcode on the radio's sticker says 080004-000000-8 How do I read the flash from the radio itself? I know it involves pressing buttons. According to the flash on the label, you have a non IMBE radio with Q498 Hardware Multikey Encryption w/OTAR H37 SMARTNET Syatems Operation What is the flas...

SO....did you get your radio yet???

(to gently push this back on topic)

K8TEK wrote:Finally utilizing all 3 lines on the display.

There are actually 5 lines on the display...and all of them get used at one point or another in r0f's photos....

I will have to go home and check the 3k's at home and see what they do.

Nice job Shaun, nice job.

So I can trade in an MT1000 for an IC-F70DS and a maxtrac for a 1821D, both at approximately half price. woohoo... Anybody want to go in on a group purchase...I have about 10 SP110's that can be used as trade-in fodder. Let me know, we have about a month to get this done. $850 for full keypad P25 VH...

Of course you could just buy one of these and be done with it...

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... &rd=1&rd=1

Yes folks, DC will be ASTROSexy on VHF in short order.

I have been considering selling my spectrum analyzer for a service monitor... but it would kill me to give up a 22ghz hp spectrum analyzer :ve4uo: Ouch. What a choice. However, you could even do the simple alignment with a spec-an if it has the ability to demodulate the signal or tell you the devia...

I will probably make this one too.

If you guys want the banner, let me know.

Too early to know if I will be able to come down, once I know, I will provide info.

As a side note, I was really impressed with Justin KB3JUV. Very cordial and professional - he puts more than a few old timer's to shame. I was licensed when I was 14, the youngest you can get a license in Region 1, and I know how difficult it can be for people to take you seriously. That's why I us...

I'll be there...Howard County Fairgrounds...I-70 and MD route 32.

perhaps a P25 radio from a ham manufacturer? That won't happen. You know they already do, They just don't call them ham radios, but the big three (besides /\/\) want to make money. If they put them in the ham line they'd not be able to charge more than $200 :baby: Why??? ICOM is charging $500+ for ...

It's not that simple... I know very little about D-STAR, and how it's modulated and what the waveforms look like, how it deviates, how the receivers are tuned... It's quite possible it won't work. Deviation is the same for both IMBE and AMBE, so if it is set for one, it should in theory work for th...

grinthock wrote:No reason why it wouldn't once you adjusted the deviation properly.

The question is... Will the settings optimized for IMBE / P25 also work to pass the D-STAR as well...

It should, D-Star is AMBE.

Pass through repeater, when he is done with it, you should also be able to use it for P25 as well. I guess that's my excure for a UHF XTS5000 to match the VHF one the way :baby: Thanks for the info, do you know of any others that have worked that way? Two maxtracs back to back, check out this threa...

Pass through repeater?? Not sure what he is doing with the Kenwood machine to make it D-STAR Hybrid???

Done some enquiries, and someone I know has a couple of these for sale: H04RDF9PW7AN. DSP.105.00.18,FIRMWARE 03.20.01.00 SYSTEM PACKAGE H35,FLASH CODE 000001-000000-9,1MEG WITH XL ASTRO ENCRYPTION. http://img2.freeimagehosting.net/uploads/th.10b8aedb02.jpg (clicky ^^) I asked if it did IMBE and he ...

Send them to Bryan or Seth

Getting ready to leave now...See everyone in a couple of hours...Seth and I will be set up in the tailgate area.

I will be tailgating in the indoor area, cowpalace...booth 3 and 4... come say hello and have a beer on me! i will tune in on the port rpt.. also i will be on BW1 and 2... mostly the uhf side.. I am thinking of making a HAMSEXY Welcome Center sign..... Any thoughts?? Do the sign, just make sure you...

For those going to the Timonium Hamfest Around 6:00am on Saturday the group I'm going down with will be setting up a portable repeater on 449.1375 PL 114.8 if you are interested in being part of the "In Crowd" .... As far as meeting up anyone still interested?? Yes, I'm in for beers/wings after, or...

akardam wrote:With apologies to 007...

http://www.akardam.net/moto/temp/disp-raymotosexy.mp3

(I was frackin' bored... waddaya gonna do...)

Now THAT is HAMSEXY!!!!!

This weekend, who's coming other than Richard who started another thread...

Uhh, dude...you could have posted here viewtopic.php?t=6793

kitn1mcc wrote:whats a better day to go and tail gate

Depends on the weather, but Saturday is better generally...The Tailgate tickets I believe are for both days.

Nice 1st post post, welcome to the forums, now for the lesson. That's MR. Richard Head to you cockbreath, you can be on a first name basis after you get past 25 posts....I know who he is, I have studied/used and controlled the technology in a previous life in the military. So have several other folk...

n3jfw wrote:hey dan

standard order for:

2 40m hamsticks(for the voice portion) if they are $15 a pop or less
one of those mounts that you can attach two whips together (to make a dipole) if around 15 bucks

So noted...minus the mounts from richard...

see ya on next Sunday...anyone else going??

Booth location?

Color me there...Only 45 minutes from the house.

http://www.frostfest.com

Anybody going??

I will be heading down with a few friends, probably early Am to get there a little after 0900.

Another vote for the Alinco...They are the only manufacturer currently producing and selling a mobile rig.

HAMSEXY DOT COM

Search found 191 matches

Re: Regarding Astro Saber Flash F99D08-5FDE00-7... IT DOES E

Re: First Non-ICOM Experimental D-Stars transceiver

Frostfest - Richmond, VA Feb 18